Zachary White Zachary White

0 Course Enrolled • 0 Course Completed

Biography

Get 100% Pass Rate Study JN0-637 Materials and Pass Exam in First Attempt

We respect different propensity of exam candidates, so there are totally three versions of JN0-637 guide dumps for your reference.The PDF version of JN0-637 practice materials helps you read content easier at your process of studying with clear arrangement and the PC Test Engine version of JN0-637 real test allows you to take simulative exam. Besides, the APP version of our practice materials, you can learn anywhere at any time with JN0-637 study guide by your eletronic devices.

Having a good command of processional knowledge in this line, they devised our high quality and high effective JN0-637 study materials by unremitting effort and studious research. They are meritorious and unsuspecting experts with professional background. By concluding quintessential points into JN0-637 Preparation engine, you can pass the exam with the least time while huge progress. And our pass rate of the JN0-637 exam questions is high as 98% to 100%.

>> Study JN0-637 Materials <<

Sure JN0-637 Pass, Reliable JN0-637 Test Book

This is the online version of the Security, Professional (JNCIP-SEC) (JN0-637) practice test software. It is also very useful for situations where you have free time to access the internet and study. Our web-based Security, Professional (JNCIP-SEC) (JN0-637) practice exam is your best option to evaluate yourself, overcome mistakes, and pass the Juniper JN0-637 Exam on the first try. You will see the difference in your preparation after going through JN0-637 practice exams.

Juniper Security, Professional (JNCIP-SEC) Sample Questions (Q43-Q48):

NEW QUESTION # 43
Exhibit:

You have deployed an SRX Series device as shown in the exhibit. The devices in the Local zone have recently been added, but their SRX interfaces have not been configured. You must configure the SRX to meet the following requirements:
Devices in the 10.1.1.0/24 network can communicate with other devices in the same network but not with other networks or the SRX.
You must be able to apply security policies to traffic flows between devices in the Local zone.
Which three configuration elements will be required as part of your configuration? (Choose three.)

A. set interfaces ge-0/0/1 unit 0 family ethernet-switching vlan-members 10
B. set security zones security-zone Local interfaces ge-0/0/1.0
C. set security zones security-zone Local interfaces irb.10
D. set protocols l2-learning global-mode switching
E. set protocols l2-learning global-mode transparent-bridge

Answer: A,B,E

Explanation:
In this scenario, we need to configure the SRX Series device so that devices in the Local zone (VLAN 10, 10.1.1.0/24 network) can communicate with each other but not with other networks or the SRX itself. Additionally, you must be able to apply security policies to traffic flows between the devices in the Local zone.

NEW QUESTION # 44
Exhibit:

Referring to the exhibit, the operator user is unable to save configuration files to a usb stick the is plugged into SRX.
What should you do to solve this problem?

A. Add the interface-control permission flag to the operation class
B. Add the system-control permission flag to the operation class
C. Add the floppy permission flag to the operations class
D. Add the system permission flag to the operation class

Answer: B

Explanation:
To solve the problem of the operator user being unable to save configuration files to a USB stick that is plugged into SRX, you need to add the system-control permission flag to the operations class.
The other options are incorrect because:
A) Adding the floppy permission flag to the operations class is not sufficient or necessary to save configuration files to a USB stick. The floppy permission flag allows the user to access the floppy drive, but not the USB drive. The USB drive is accessed by the system permission flag, which is already included in the operations class1.
C) Adding the interface-control permission flag to the operations class is also not sufficient or necessary to save configuration files to a USB stick. The interface-control permission flag allows the user to configure and monitor interfaces, but not to save configuration files. The configuration permission flag, which is also already included in the operations class, allows the user to save configuration files1.
D) Adding the system permission flag to the operations class is redundant and ineffective to save configuration files to a USB stick. The system permission flag allows the user to access the system directory, which includes the USB drive. However, the operations class already has the system permission flag by default1. The problem is not the lack of system permission, but the lack of system- control permission.
Therefore, the correct answer is B. You need to add the system-control permission flag to the operations class to solve the problem. The system-control permission flag allows the user to perform system-level operations, such as rebooting, halting, or snapshotting the device1. These operations are required to mount, unmount, and copy files to and from the USB drive2. To add the system-control permission flag to the operations class, you need to perform the following steps:
Enter the configuration mode: user@host> configure
Navigate to the system login class hierarchy: user@host# edit system login class operations Add the system-control permission flag: user@host# set permissions system-control Commit the changes: user@host# commit Reference: login (System) How to mount a USB drive on EX/SRX/MX/QFX Series platforms to import/export files

NEW QUESTION # 45
Click the Exhibit button.

When attempting to enroll an SRX Series device to JATP, you receive the error shown in the exhibit.
What is the cause of the error?

A. The fxp0 IP address is not routable
B. The SRX Series device certificate does not match the JATP certificate
C. The SRX Series device does not have an IP address assigned to the interface that accesses JATP
D. A firewall is blocking HTTPS on fxp0

Answer: C

Explanation:
Reference:
https://kb.juniper.net/InfoCenter/index?page=content&id=KB33979&cat=JATP_SERIES&actp=LIST

NEW QUESTION # 46
Referring to the exhibit, which two statements are correct? (Choose two.)

A. This device is the backup node for SRG1.
B. The ge-0/0/3.0 and ge-0/0/4.0 interfaces are active and will respond to ARP requests to the virtual IP MAC address.
C. This device is the active node for SRG1.
D. The ge-0/0/3.0 and ge-0/0/4.0 interfaces are not active and will not respond to ARP requests to the virtual IP MAC address.

Answer: A,D

Explanation:
The interfaces are active and respond to ARP for virtual IP as long as the node is the primary or active node in the SRG group. This ensures high availability and proper traffic forwarding. For information, refer to Juniper SRX HA Documentation.
The exhibit shows information about a chassis cluster and its services redundancy group (SRG1).
The exhibit indicates that this SRX device is in the backup role for SRG1. The status: BACKUP field confirms that this device is currently in a standby role and is not the active node for the services redundancy group.
Since the device is in the backup role, the interfaces ge-0/0/3.0 and ge-0/0/4.0 will not respond to ARP requests for the virtual IP's MAC address. Only the active node's interfaces respond to ARP requests in a chassis cluster configuration.

NEW QUESTION # 47
You are enabling advanced policy-based routing. You have configured a static route that has a next hop from the inet.0 routing table. Unfortunately, this static route is not active in your routing instance.
In this scenario, which solution is needed to use this next hop?

A. Use RIB groups.
B. Use policies.
C. Use filter-based forwarding.
D. Use transparent mode.

Answer: A

Explanation:
To enable advanced policy-based routing in Junos OS and activate a static route with a next-hop address in the inet.0 table within your routing instance, you should utilize RIB groups. RIB groups allow you to import routes from one routing table to another. In this scenario, the static route within the routing instance needs access to the inet.0 routes, which is facilitated by configuring a RIB group. Juniper's documentation outlines RIB groups as a necessary component for handling instances where routes need to be shared across routing tables, thereby ensuring seamless traffic flow through specified routes. For more details, refer to the Juniper Networks Documentation on RIB Groups.
In Junos OS for SRX Series devices, when enabling advanced policy-based routing and configuring a static route with a next-hop from the inet.0 routing table, the issue arises because the static route is not being used in the routing instance. This is a common scenario when the next-hop belongs to a different routing table or instance, and the routing instance is not aware of that next-hop.
To resolve this, RIB (Routing Information Base) groups are used. RIB groups allow routes from one routing table (RIB) to be shared or imported into another routing table. This means that the routing instance can import the necessary routes from inet.0 and make them available for the routing instance where the policy- based routing is applied.
Detailed Steps:
* Configure the Static Route: First, configure the static route pointing to the next-hop in inet.0. Here's an example:
bash
set routing-options static route 10.1.1.0/24 next-hop 192.168.1.1
This static route will be placed in the inet.0 routing table by default.
* Create and Apply a RIB Group: To import routes from inet.0 into the routing instance, create a RIB group configuration. This will allow the static route from inet.0 to be visible within the routing instance.
Example configuration for the RIB group:
bash
set routing-options rib-groups RIB-GROUP import-rib inet.0
set routing-options rib-groups RIB-GROUP import-rib <routing-instance-name>.inet.0 This configuration ensures that routes from inet.0 are imported into the specified routing instance.
* Apply the RIB Group to the Routing Instance: Once the RIB group is configured, apply it to the appropriate routing instance:
bash
set routing-instances <routing-instance-name> routing-options rib-group RIB-GROUP
* Verify Configuration: Use the following command to verify that the static route has been imported into the routing instance:
bash
show route table <routing-instance-name>.inet.0
The output should now display the static route imported from inet.0.
Juniper Security Reference:
* RIB Groups Overview: Juniper's documentation provides detailed information on how RIB groups function and how to use them to share routes between different routing tables. This is essential for scenarios involving policy-based routing where routes from one instance (like inet.0) need to be available in another instance. Reference: Juniper Networks Documentation on RIB Groups.
By using RIB groups, you ensure that the static route from inet.0 is available in the appropriate routing instance for policy-based routing to function correctly. This avoids the need for other methods like filter- based forwarding or transparent mode, which do not address the specific issue of static route visibility across routing instances.

NEW QUESTION # 48
......

If you don't have enough time to study for your certification exam, VCEDumps provides Juniper JN0-637 Pdf questions. You may quickly download Juniper JN0-637 exam questions in PDF format on your smartphone, tablet, or desktop. You can Print Juniper JN0-637 PDF Questions and answers on paper and make them portable so you can study on your own time and carry them wherever you go.

Sure JN0-637 Pass: https://www.vcedumps.com/JN0-637-examcollection.html

It is better than Juniper JN0-637 tutorials and any other related materials, The JN0-637 practice materials are a great beginning to prepare your exam, Juniper Study JN0-637 Materials We has always been adhering to the "quality first, customer first" business purpose, sincerely to cooperate with you, Accordingly there are huge changes on the study models of our JN0-637 exam dumps as well.

You might even notice subtle changes in how I've been writing this book, We go on at some length about that, It is better than Juniper JN0-637 tutorials and any other related materials.

The JN0-637 practice materials are a great beginning to prepare your exam, We has always been adhering to the "quality first, customer first" business purpose, sincerely to cooperate with you.

Free PDF Juniper - JN0-637 Perfect Study Materials

Accordingly there are huge changes on the study models of our JN0-637 exam dumps as well, It is ok that you can free download the demos of the JN0-637 exam questions.

Zachary White Zachary White

Biography

Get 100% Pass Rate Study JN0-637 Materials and Pass Exam in First Attempt

Sure JN0-637 Pass, Reliable JN0-637 Test Book

Juniper Security, Professional (JNCIP-SEC) Sample Questions (Q43-Q48):

Free PDF Juniper - JN0-637 Perfect Study Materials

Quick Links

Resources

Support